Articles on: Frequently Asked Questions (FAQ)

How can I view scanned products with live filtering to reduce variant count and payment?

Use this article to show how the scanned product count updates live as you filter, so you can confirm your selection before running the feed and reduce your variant count and payment.


Tip: Filtering lets you confirm which products are included before you run the feed.



How to View Scanned Products With Live Filtering


  1. Open the filter: Go to Store Product Filter in your feed settings. You can also open the linked guide: Store Product Filter.
  2. Apply a filter: Choose a filter such as Vendor or Tags.
  3. Check the scanned count: The scanned product count updates in real time as you change the filter.
  4. Spot-check the results: Confirm that the scanned products match what you expect before you run the feed.


Narrowing the scanned products to only the ones you need can help reduce your variant count and payment.



Key Rules & Technical Details


  • Live count: The scanned product count updates as you filter, so you do not need to run the feed to see the result.
  • Verify before running: Check the count and a sample of products before you run the feed.



Troubleshooting Steps


  • Issue: The scanned product count is higher than expected → Solution: Add or adjust a filter, such as Vendor or Tags, to narrow the scanned products.
  • Issue: The scanned product count is lower than expected → Solution: Remove or relax the filter criteria, then check the count again.



Good Articles to Continue


Updated on: 13/11/2026

Was this article helpful?

Share your feedback

Cancel

Thank you!