Articles on: Frequently Asked Questions (FAQ)

How to set up multiple feeds to sum up quantity ?

You can set up multiple feeds so their quantities add up to a single total for each product. This is useful when stock is supplied by several sources, such as different warehouses or suppliers.



How to Set Up Multiple Feeds to Sum Quantities


Go to App → Feed Settings → Step 2: Matching Column


  1. Set the first feed to overwrite: In the Quantity field's Smart Settings, keep Overwrite existing quantity selected. This is the default.



  1. Set every additional feed to add: In the Quantity field's Smart Settings of each additional feed, select Add/Deduct with existing quantity (+).



  1. Schedule all feeds daily: Turn on a daily schedule for all three feeds. Set the first feed to run earliest, and the other two to run after it, in sequence.


The first feed must use Overwrite existing quantity, and all additional feeds must use Add/Deduct with existing quantity (+).



Why This Matters


If additional feeds stay on Overwrite existing quantity, they replace the first feed's values, and the total quantity will be wrong.


With Add/Deduct with existing quantity (+), each new feed adds its quantity to the total, so the sum is correct without overwriting or duplicating counts.



Key Rules & Technical Details


  • Feed order: Run the first feed first, so the additional feeds add to its result.
  • Duplicate rows: If one feed contains several rows for the same SKU, the rows are summed before they are added to the existing stock.



Troubleshooting Steps


  • Issue: The total quantity is lower than expected → Solution: Check that the first feed uses Overwrite existing quantity, and that the additional feeds use Add/Deduct with existing quantity (+).
  • Issue: The total quantity keeps growing after each sync → Solution: Check that the feed uses Add/Deduct with existing quantity (+) only when it is an additional feed. The first feed must stay on Overwrite existing quantity.



Good Articles to Continue


Updated on: 13/11/2026

Was this article helpful?

Share your feedback

Cancel

Thank you!