Articles on: Frequently Asked Questions (FAQ)

I keep getting an error "Fail to auto detect file format"

If you see the error "Fail to auto detect file format", Stock Sync could not identify the format of your file. This article explains how to set the format manually, or how to fix the file access that causes the error.



How to Resolve the "Fail to Auto Detect File Format" Error



Reason: Stock Sync could not detect the file format automatically.


Solution: Try the following steps:


  1. Set the file format and encoding: Go to Feed Settings → Step 1: Feed Manager, and select the file format and file encoding manually.
  2. Allow access to the file: If Stock Sync cannot access the file, for example because of supplier IP restrictions, ask your supplier to whitelist Stock Sync's IP address, or to provide a downloadable version of the file.
  3. Check the file type: If the feed URL loads an HTML page instead of the expected file, download the file directly from your supplier. Check its actual format, then select the correct type manually, such as XML, CSV, or HTML Table.



Key Rules & Technical Details


  • Manual selection: Automatic detection can fail, so setting the format and encoding yourself is the most reliable fix.
  • Direct file link: The feed link must load the data file itself, not a web page that displays it.



Troubleshooting Steps


  • Issue: The error appears when the feed runs → Solution: Select the file format and encoding manually in Feed Settings → Step 1: Feed Manager.
  • Issue: The feed URL returns an HTML page → Solution: Download the file directly from your supplier, check its format, then select the correct type.
  • Issue: Stock Sync cannot access the file → Solution: Ask your supplier to whitelist Stock Sync's IP address, or to provide a downloadable file.



Good Articles to Continue


Updated on: 16/11/2026

Was this article helpful?

Share your feedback

Cancel

Thank you!