Articles on: Frequently Asked Questions (FAQ)

If you have archived all your products and want to reactivate them, is that possible?

Yes, you can reactivate archived products in Stock Sync. If you do not have a feed file for the update, you can use the bulk product connection to set the status of all products back to active.


How to Reactivate Archived Products


  1. Open the bulk product connection: Set up a bulk product connection in Stock Sync. For more details, see Bulk Product Edit Connection Method.
  2. Set the status field: Map the status field and choose the option as a fixed value.
  3. Select Active: In the required field, select Active.
  4. Run the process: Run the process to update the products.




Key Rules & Technical Details


This method works without a feed file, so you can reactivate products from the bulk product connection alone.



Troubleshooting Steps


  • Issue: Archived products are not reactivated after the process runs → Solution: Check that the status field is set to the fixed value Active, then run the process again.
  • Issue: Products were removed by a remove feed, not archived → Solution: Use the UNDO button to restore them, as described in the article below.



Good Articles to Continue


Updated on: 18/11/2026

Was this article helpful?

Share your feedback

Cancel

Thank you!